SNAPSKRU

Key Benefits

• Once it ‘POPs’ you know its locked!
  Symmetrically locks to the wall/ceiling for a truly secure fastening – activates with an audible ‘pop’.
• Incredibly strong!
  Holds up to 80% more load than other reported self-drilling drywall anchors.
• Built-in positive stop!
  Prevents overdriving the anchor when using a screwgun.
• Resist vibration and shock!
  Locking its thread into the wall, Snapskru anchors don’t pull loose when vibrated or shocked.
• Re-useable in the same hole!
  Remove the screw, without the anchor. Then re-install later, in the same anchor, with the same screw!
• Accepts a range of screw sizes!
  Use 3.5, 4.0, 4.5 and 5.0mm screws! (#6, #8, #10)

Everyone loves self-drilling drywall anchors – you don’t need a drill to install them and they go in quickly and easily. The TOGGLER SnapSkru® anchors are the only ones, however, that lock symmetrically on to the wall or ceiling for a truly secure fastening! Every time you tug on a toilet tissue holder or a disabled handrail or a window blind, other self-drilling anchors come out as quickly as they went in, because nothing prevents their sharp threads from cutting back through the drywall as the anchor is locked in the wall.

When activated with a screw (and you can use any diameter from 3.5mm – 4.5mm), the SnapSkru® opens with an audible “pop”, locking the anchor on the wall. The drywall gypsum and its paper are kept in compression and thereby immediately reinforced, providing much greater holding power than the other self-drilling anchors that are just a small screw in a large screw. And the SnapSkru® anchor’s built-in positive stop resists over-drilling! Try it for yourself!

Now that’s no ordinary self-drilling anchor.

INSTALLATION